Rubi Tile Spacers 1.5mm (1000pcs)

Ensure perfect tile spacing with Rubi Tile Spacers. These 1.5mm spacers, available in a pack of 1000, help create uniform gaps for a neat and professional finish on your tiled surfaces.

RUBI crossheads form, without a doubt, a truly indispensable range for obtaining perfect finishes in any ceramic tile installation job.

RUBI manufactures joint crossheads with a high-quality base material and, for this reason, they do not have any type of imperfections or burrs.

Crossheads for joints of 1, 1.5, 2 and 3 mm are recommended for the installation of ceramic tile coverings and floors with minimal joints. The solid structure of the crossheads for 1, 1.5, 2 and 3 mm joints has been designed to provide greater resistance to bending and crushing. These properties make the crossheads for 1, 1.5, 2 and 3 mm joints highly recommended for covering large format ceramic tiles.

The L (long) versions of the 2 and 3 mm crossheads are perfect, both for coverings and for floors with large-format or rectified ceramic tiles, with a fine joint.

The internal geometry of the crossheads for 3 mm long and 4 mm joints has been designed to provide greater resistance to bending and crushing. These properties make the 3 mm long joint crosspieces highly recommended for covering large format ceramic tiles.

The internal geometry of the crossheads for joints from 5 to 12 mm is hollow and has a design with internal reinforcements that allows them to withstand stress and prevent crushing. This hollow design facilitates the entry of the joint mortar and, if the type of installation allows, leaving the crosshead inside the placement joint without this affecting its integrity in the future.

RUBI's 5 mm reinforced crossheads are more rigid crossheads, especially designed for use on floors with large format tiles. The underside of the 5 mm reinforced crossheads is designed to offer good seating in the grip material and facilitate, if the type of installation allows, that the crosshead remains inside the installation joint without this affect its integrity in the future.

The professional installer is very aware of the importance of using high quality spacers, since the finish of his work can be seriously deteriorated due to imperfections and irregularities.

RUBI crossheads stand out for the regularity of their production, the homogeneity of measurements and the absence of burrs and any other small defects. These particularities allow professionals who trust in RUBI crossheads, Ts and wedges to obtain excellent finishes with total precision.